Mopec PathCam Support – Tom McGinnis Histology Partners

[featured_image]
Download
  • Version
  • Download 1
  • File Size 190.19 MB
  • File Count 1
  • Create Date February 27, 2026
  • Last Updated February 27, 2026

Mopec PathCam Support - Tom McGinnis Histology Partners

PathCam
›
Service Partners
›
Software Download

PathCam Field Service Package

Mopec · Histology Partners · Tom McGinnis

This download is a hardware-locked field diagnostic build of PathCam v2.4.123, provisioned exclusively for Thomas McGinnis (Histology Partners LLC) for use in Mopec-coordinated on-site service visits. The software is cryptographically bound to a single designated service machine and cannot be activated on any other system.

Authorized Recipient
Thomas McGinnis
Service Director, Histology Partners LLC
SDVOSB · CETA Certified · NSF 49

Coordinated Through
MOPEC
Authorized PathCam Distributor
Alexandria Gonzales · Director of Technology

Package Details
PathCam v2.4.123
Hardware-locked · Single machine
Field validation build · 190.19 MB
Demo / Non-Clinical

ℹ️

Intended Use: This build is designed solely for on-site camera recognition testing, peripheral device commissioning, and hardware validation at facilities receiving a Mopec Encore Maestro Grossing Station. It is not intended for clinical image capture, patient records, LIS integration, or production pathology workflows. Facility software licenses are activated separately at mopec.com/activate.

📋
Terms & License Agreement — Required Before Download

By downloading this software, you acknowledge that you have read, understood, and agree to be bound by all of the following agreements. This constitutes a valid and legally binding acceptance under the U.S. E-SIGN Act (15 U.S.C. § 7001 et seq.). If you do not agree, do not download or install this software.

①

PathCam End User License Agreement (EULA)
Governs your right to install, use, and access PathCam software. Published by Camtronics LLC (Distributor) on behalf of National Intel LLC (Software Provider). Covers license grant, restrictions, IP ownership, liability limitations, and termination.

Read PathCam EULA →

②

PathCam Terms of Service
General terms governing use of PathCam software, services, and the PathCam.com platform. Incorporates the EULA and applies to all interactions with PathCam products.

Read PathCam Terms →

③

National Intel LLC — Terms of Service
National Intel LLC is the software developer and underlying IP owner for PathCam. Their Terms of Service govern the software's development, IP ownership, data handling, and technology licensing. These terms are incorporated by reference into the PathCam EULA and are binding on all users of PathCam software.

Read National Intel Terms →

⚖️ Legal Notice: Downloading, installing, retaining, or using this software constitutes your express agreement to all three documents listed above and constitutes a valid electronic signature under the U.S. E-SIGN Act. These agreements are legally binding. The software license is non-transferable and hardware-locked to a single designated machine. Unauthorized use, distribution, or transfer is a material breach of these agreements and may result in immediate license termination and legal action.

Questions about licensing or access? Contact cs@pathcam.com or visit the PathCam Support page. For facility activation, visit mopec.com/activate.

Authorized Download Below


After Installing
Validate your hardware ID using the Hardware ID Checker Tool before contacting PathCam for license provisioning.

Partner Profile
View Tom McGinnis's full credential profile, service workflow, and active deployment status at pathcam.com/tjmcginnis.

Facility Activation
Once hardware is validated, facility software trials and licenses are registered at mopec.com/activate.

PathCam · CamtronicsUSA.com  ·  Software developed by National Intel LLC  · 
EULA  · 
Terms  · 
NI Terms

Attached Files

FileAction
PathCam.com_v2.4.123_HistologyPartners.com-TJMcGinnis.zipDownload